Jump to content

HP-42S

From Wikipedia, the free encyclopedia

HP-42S
The HP-42S
TypeProgrammable scientific
ManufacturerHewlett-Packard
Introduced1988
Discontinued1995
Calculator
Entry modeRPN
Precision12 display digits (15 digits internally),[1] exponent ±499
Display typeLCD dot-matrix
Display size2 lines, 22 characters, 131×16 pixels
CPU
ProcessorSaturn (Lewis)
Programming
Programming language(s)RPN key stroke (fully merged)
Firmware memory64 KB of ROM
Program steps7200
Interfaces
PortsIR (Infrared) printing
Other
Power supply3×1.5 V button cell batteries (Panasonic LR44, Duracell PX76A/675A or Energizer 357/303)
Weight6 oz (170 g)
Dimensions148×80×15 mm

The HP-42S RPN Scientific is a programmable RPN Scientific hand held calculator introduced by Hewlett-Packard in 1988.It is a popular calculator designed for science and engineering students.

Overview

[edit]

Perhaps the HP-42S was to be released as a replacement for the aging HP-41 series as it is designed to be compatible with all programs written for the HP-41. Since it lacked expandability, and lacked any real I/O ability, both key features of the HP-41 series, it was marketed as an HP-15C replacement.

The 42S, however, has a much smaller form factor than the 41, and features many more built-in functions, such as a matrix editor, complex number support, an equation solver, user-defined menus, and basic graphing capabilities (the 42S can draw graphs only by programs). Additionally, it features a two-line dot matrix display, which made stack manipulation easier to understand.

Production of the 42S ended in 1995.[2]

Specifications

[edit]
HP-42S battery compartment and the IR diode
HP-42S calculator internal teardown
  • Series: Pioneer
  • Code Name: Davinci
  • Introduction: 1988-10-31
  • 64 KB of ROM
  • 8 KB of RAM
  • Functions: Over 350
  • Expandability: Officially no other than IR printing (32 KB memory upgrade[3] and over-clocking hardware[4] hacks are possible)
  • Peripherals: HP 82240A infrared printer

Features

[edit]

Programming

[edit]

The HP-42S is keystroke-programmable, meaning that it can remember and later execute sequences of keystrokes to solve particular problems of interest to the user. The HP-42S uses a superset of the HP-41CX FOCAL language.

Sample program

[edit]

This is a sample program which computes the factorial of an input integer number (ignoring the calculator's built-in factorial function). The program consumes 18 bytes. No memory registers are used.

Step Instruction Comment
01 LBLFAC Start of program "FAC"
02 1 1 is put into X, hence the value to be calculated upon (which was initially in X) is lifted (pushed) into stack register Y
03 LBL00 Define label 00
04 RCL×STY Recall stack register Y and multiply with X
05 DSESTY Decrement stack register Y and if not zero ...
06 GTO00 ... go back to label 00
07 END or RTN Returns control (and result in X) to either the user or to a calling program.

Legacy

[edit]
The SwissMicros DM42 is available since 2017 and features the complete functionality of the HP-42S. In a number of aspects it goes beyond the original, e.g., the stack may be user-configured to have more levels than four as in the HP-42S.

An open-source software version of the HP-42S (Free42) was developed by Thomas Okken that runs on iOS, Android, Windows, MacOS, and Linux. Its source code has been released under the GNU General Public License. In May 2017, SwissMicros released pre-production samples of an RPN calculator closely resembling the HP-42S, the DM42. The final product was released on the 9 December 2017. Even though slightly smaller (144×77×12 mm, 180 g) than the original HP-42S (148×80×15 mm, 170 g), the calculator comes with an additional top row of keys for soft menus, a keyboard layout supporting direct alpha character input, a much larger high-contrast display (Sharp low power transflective memory LCD with a resolution of 400×240, protected by Gorilla Glass) showing all four stack levels at once (configurable), ca. 75 KB usable RAM, a beeper, a callable real-time clock as well as an infrared port for HP 82240A/HP 82240B printer support and a USB interface (with Micro-B connector) emulating a FAT16-formatted USB mass storage device for easy program transfer and state backup / transfer as well as for firmware updates. The calculator, which comes in a stainless steel case with matte black physical vapor deposition (PVD) coating, supports keyboard overlays and is based on a modified version of Thomas Okken's GPLed Free42 simulator with Intel's decimal floating-point math library for higher precision (decimal128) running on an STM32L476RG processor (ARM Cortex-M4 core, 128 KB RAM, 1 MB internal flash) with another 8 MB of external QSPI flash (of which ca. 6 MB are available to users). It is powered by a CR2032 coin cell or via USB and clocked dynamically at 24–80 MHz. Since 2021, Free42 version 3 (and Plus42 version 1) optionally supports a dynamic RPN stack only limited by the amount of available memory instead of the classical four-level stack. This feature was incorporated as a selectable function into the DM42 since firmware DMCP-3.21/DM42-3.18.[5][6]

The DM42 is also the hardware basis for the community-developed WP 43S calculator (called WP43 in more recent revisions since 2022),[7][8] a successor to the WP 34S. The WP43 is supporting measurement system analysis (MSA) for the first time in a calculator. Expanding on the WP43 software and also based on the DM42 hardware, there are also variants with a considerable different keyboard and user interface called WP 43C (2011) / C43 (2022) / C47 (2023).

Another project based on the DM42 hardware is Christophe de Dinechin's DB48X (2022) to recreate an RPL environment from scratch.

See also

[edit]

References

[edit]
  1. ^ HP-42S RPN Scientific Calculator - Owner's Manual (PDF) (1 ed.). Corvallis, OR, USA: Hewlett-Packard Co. June 1988. p. 3. 00042-90001. Archived (PDF) from the original on 2017-09-17. Retrieved 2017-09-17.
  2. ^ "HP-42S". Museum of HP Calculators. Retrieved 2016-10-27.
  3. ^ Hosoda, Takayuki (2007-10-10). "Upgrading the memory of the HP 42S to 32KB". Archived from the original on 2017-09-17. Retrieved 2011-08-12.
  4. ^ HP 42S Easy Double Speed / Turbo Mode for Calculator and Programs, retrieved 2022-08-05
  5. ^ https://forum.swissmicros.com/viewtopic.php?f=16&t=2939
  6. ^ https://forum.swissmicros.com/viewtopic.php?f=15&t=2845
  7. ^ Bonin, Walter (2019) [2015]. WP 43S Owner's Manual (PDF). 0.13 (draft ed.). ISBN 978-1-72950098-9. Retrieved 2019-10-31. [1] [2] (314 pages)
  8. ^ Bonin, Walter (2019) [2015]. WP 43S Reference Manual (PDF). 0.13 (draft ed.). ISBN 978-1-72950106-1. Retrieved 2019-10-31. [3] [4] (271 pages)

Further reading

[edit]
[edit]